The Proofer Machine Issues And Measures You May Meet

Nowadays, the commercial proofer oven is important part in bakery business, because it can improve the productivity and increase the shop owner profit. But after proofer machine long time operating, there will be some problems occur. This article will list some reasons and guide you how to maintenance.

Inaccurate Temperature Control:

Issue: The temperature displayed by the proofing cabinet does not match the actual temperature, it has different digit compare setting with actual.

Measures: Check if the temperature sensor is damaged, clean or replace the sensor, especially probe. Calibrate the thermostat to ensure accuracy.

Inaccurate Humidity Control:

Issue: The Fermentation proofer's humidity control cannot reach the set value.

Measures: Check if the humidifier is working properly, clean or replace the humidifier. Check if the water level in the tank is sufficient.

Heater Failure:

Issue: The bakery Fermentation proofer oven cannot heat up or heats up slowly.

Measures: Check if the heater pipe is damaged or not and check the power lines and fuses.

Humidifier Failure:

Issue: The proofer cabinet cannot humidify well or the humidification effect is poor.

Measures: Check if the humidifier is blocked, clean or replace the humidifier.

Power Supply Issues:

Issue: The proffer bakery cabinet cannot start or loses power suddenly.

Measures: Check if the power socket and power cord are normal, check the internal circuitry and fuses.

Sealing Issues:

Issue: The proofing machine door seals poorly, causing temperature and humidity loss.

Measures: Usually will suggest you replace the seal is better.

Internal Cleaning Issues:

Issue: Accumulation of dirt and residue inside the proofing cabinet.

Measures: Regularly clean the inside of the proofing cabinet, use mild cleaning agents and a soft cloth.

Drainage Issues:

Issue: Water accumulates at the bottom of the proofing cabinet or drainage is not smooth.

Measures: Check if the drainage pipe is blocked, clear any blockages.

Noise Issues:

Issue: Excessive noise when the proofing cabinet is operating.

Measures: Check if the fan and motor are loose or damaged, repair or replace them if necessary.

Circuit Board Failure:

Issue: The circuit board of the proofing cabinet malfunctions, causing functional abnormalities.

Measures: Check if the components on the circuit board are burnt out or damaged, replace the circuit board if necessary.

When dealing with these issues, if you are unsure how to proceed, or if the problem is complex, it is recommended to contact professional maintenance personnel for inspection and repair. Regular maintenance and inspection can prevent many issues and ensure the long-term stable operation of the proofing cabinet.